Secunderabad, Hyderabad, Telangana
GST No. 36CJOPD0252L1Z5
Valve
Leading Wholesale Trader of ksb globe valve flanged ends, forbes marshall bellow type reducing valve, kartar sluice valve, forbes marshall pressure reducing valve, forbes marshall air vent and forbes marshall thermodynamic steam trap from Secunderabad.Ksb Globe Valve Flanged Ends
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| End Connection | Flanged End |
| Usage/Application | Industrial |
| Pressure | High Pressure |
| Material | Carbon Steel |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 50 to 300 mm |
| Driving mode | Manual |
| Inspection And Testing Standard | API 6 D |
| End | Flanged End |
| Automation Grade | Manual |
| Condition | New |
We are amongst the prominent enterprise, widely engaged in manufacturing and supplying the finest qualityCast Steel Globe Valve. Offered valve is widely used in boilers to cut-off the flow of air or liquid automatically at a certain pressure. The valve provided by us is manufactured under the stern direction of our dedicated professionals by making use of premium quality raw materials and ultra-modern technology in conformity with market quality standards. Besides, clients can easily avail this Cast Steel Globe Valve from us at market leading prices.
Features
- Cast Steel Globe Valves have been designed to meet the requirements BS 1873 /ASME B 16.34
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- Anti-frictional Ball bearings are provided in higher sizes and classes.
- Outside screw and yoke construction
- All the valves provided with backseat arrangement
- The gland is of self aligning two piece type
Deep stuffing box
The Seat-rings are shoulder seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body
The Body to Bonnet joint is a male & female in ASME 150#, 300# & 600# valves and ring joint is used in higher classes
Drawings
- Globe Valves 150#
- Globe Valves 300#
- Angle and Y type design available
- For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
- Locking arrangement
- Gear, Electrical, Hydraulic or Pneumatic actuator available
- Regulating, guided and soft seated plugs available
- Bellow Seal for critical service and hazardous media
Additional Information:
Forbes Marshall Bellow Type Reducing Valve
-
-
-
- +4
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Pressure | 19 kg |
| Media | Steam |
| Automation Grade | Automatic |
| Material Grade | SG Iron |
| Usage/Application | steam, or gases such as compressed air |
| End Connection | Screwed End |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Valve Size | 1/2 , 3/4 and 1screwed BSP |
| Usage/Application | steam, or gases such as compressed air |
| Brand | Fores Marshall |
| Temperature (Deg. Celsius) | Maximum upstream pressure 19 bar Maximum downstream reduced pressure 8.6 bar |
| Condition | New |
| Automation Grade | Automatic |
Description The BRV2 is a direct acting pressure reducing valve suitable for steam, or gases such as compressed air.
Available types BRV2 Screwed with SG iron body. Flanged with SG iron body. BRV2S with stainless steel bellows assembly. BRV2B with phosphor bronze/brass bellows assembly. BRV2SP optional types with external pressure sensing. BRV2BP optional types with external pressure sensing.
Sizes and pipe connections ½”, ¾” and 1" screwed BSP (BS 21 Rp) of NPT. DN15. 20 and 25 flanged BS 4504 PN25.
Limiting conditions Maximum body design conditions PN25 Maximum upstream pressure 19 bar Maximum downstream reduced pressure 8.6 bar Maximum design temperature 210-C Maximum recommended turndown ratio 10:1 at maximum flow Designed for a maximum cold hydraulic test pressure of 38 bar g
Additional Information:
Kartar Sluice Valve
-
-
-
- +7
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Size | 50 mm to 500 mm |
| End Connection Type | Flanged |
| Material | Cast Iron |
| Usage/Application | For Water Line |
| End Connection | Flanged End |
| Is It ISO Certified | ISO Certified |
| Media | Water |
| Temperature Of Media | High Temperature, Medium Temperature, Normal Temperature |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 50 to 500 mm |
| Usage/Application | For water line |
| Pressure (psi) | 10 & 16 kg |
| Automation Grade | Manual |
| Color | Black, Blue |
| Brand | Kartar |
| Material | Cast Iron |
Sluice Valves
| Design Standard : IS 14846 for sizes upto 300mm, PN,1.0 & 1.6. IS 2906 for sizes 350mm and above, PN 1.0 & 1.6 BS 5150, BS 5163. Size : 50mm to 750mm Type : Bolted bonnet /Non-rising Spindle, Solid taper wedge. Material of Construction :ASTM A 126/ IS 210. |
Additional Information:
Forbes Marshall Pressure Reducing Valve
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Pressure | 17 kg |
| Design | Pilot Operated |
| Media | Steam |
| Automation Grade | Automatic |
| Material Grade | Cast Iron |
| Usage/Application | For Steam |
| End Connection | Screwed & Flanged End |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Valve Size | 15,20, 25,40, 50 and 80 NB |
| Usage/Application | for steam or compressed air |
| Pressure | 42 bar |
| Brand | Fores Marshall |
| Temperature (Deg. Celsius) | 427 |
| Model Number | DP 143 |
Limiting Conditions Maximum Working Condition 26 kg / cm2 at 300° C. Body design Conditions 42 kg / cm2 at 427° C. Cold Hydraulic test pressure without internals 52 kg/cm2 Three colour coded pressure adjustment springs are available for the following downstream pressure ranges: Yellow :02 to 3 bar Blue :2.5 to 7 bar Red :6.0 to 17.3 bar Grey :16.0 to 24.4 bar
Sizes: NB 15,20, 25,40, 50 and 80. Std. Accessories: Pr. Gauge, syphon & Gauge cock Pipe Connections: Flanged to - BS10 table - 'J' * & 'K' ANSI - 300' * & '600' DIN - ND - '25' & * '40' *Note - 80 NB has these flanges only. Available with IBR certificate Also available for air applications.
Pressure Sensing Pipe: The DP 143 valve controls the downstream pressure by sensing the down stream pressure through an external sensing pipe taken from down stream to the pilot valve chamber (10) Fitting of this external pressure sensing pipe is described in the User manual If the external sensing pipe is not provided then the valve controls by internal pressure sensing pipe (19). However the capacity in this case will be reduced.
Installation: See User manual supplied with the valve.
How to specify: Example 1) 20 NB SPIRAX MARSHALL DP -143 FOR STEAM FLANGED TO BS 10 TABLE 'K' IBR (OR NIBR). 2) 40 NB SPIRAX MARSHALL DP 143 FOR AIR FLANGEDTO ANSI 300 NIBR.
Additional Information:
Forbes Marshall Air Vent
Approx. Rs 101 / PieceGet Latest Price
Product BrochureProduct Details:| Valve Size | up to 4 inch |
| Material | Carbon Steel |
| Usage/Application | Industrial Use |
| Size | 1/2", 3/4" |
| Type | Air Vent |
| Brand | Forbes Marshall |
| Country of Origin | Made in India |
| Size | 15 to 25 mm |
| Usage/Application | fitted with an inbuilt flat strainer screen |
| Material | Cast Iron |
| Max Operating Temperature | 400 c |
| Pressure Ranges | 35 kg |
Description : Thermostatic Steam Trap / Air Vent fitted with an inbuilt flat strainer screen having 0.8 mm dia. Perforations.
Size and Pipe Connections : 15 NB and 20 NB Screwed BSPT/NPT Socket Weldable Ends.
Limiting Conditions Maximum Operating Conditions PMO - Max. Operating Pressure 32 barg TMO - Max. Opearting Tempreture 287 deg C Body Design Conditions: PMA- Max Allowable Pressure 50 bar g @ 50 deg C TMA - Max. Allowable Temperature 400 deg C @ 35 bar g
Additional Information:
Forbes Marshall Thermodynamic Steam Trap
-
-
-
- +9
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel |
| Size | 1/2" & 3/4" |
| Ends | Screwed End |
| Maximum Working Pressure | 63 kg |
| Media | Steam |
| Operating Temperature | 100 Deg. C |
| Country of Origin | Made in India |
| Size | 15 to 25 mm |
| Material | Bronze & Stainless Steel |
| Model | Thermodynamics |
| Temperature | 450 c |
| Pressure Ranges | 55 kg |
Description: Thermodynamic steam trap with inbuilt strainer and full stainless steel construction, best suited for header and mainline drains and drop legs.
Sizes and Pipe Connections: 15NBand20NB Screwed BSPT/NPT & Socket Wieldable ends
Note: 1. Available with ASA - 150, 300 & 600 weld on flanges on request. 2. Available with IBR certificate
Limiting Conditions: Maximum operating conditions PMO - Max. operating pressure for screwed end 31.64 kg/cm' TMO - Max. operating temperature 427°C. Hydraulic test pressure for screwed ends 63.0 kg/cm2 PMO - Max. operating pressure for socket-weld ends 44.0 kg/cm1 Hydraulic test pressure for socket weld ends 88.0 kg/cm' PMOB-Max. operating back pressure on outlet should not exceed 80% of inlet pressure. Minimum inlet pressure for satisfactory operation 0.25 kg/cm2 On special request TD-3 can be supplied for PMO - Max operating pressure for socket-weld ends 55.0 kg/cm2 TMO - Max. Operating temperature 450°C.
Additional Information:
Ksb Cast Steel Check Valves
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Steel |
| Media | Fuel |
| Certification | IBR |
| End Connection | Flanged End |
| Material Grade | WCB A 216 |
| Automation Grade | Automatic |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 15 to 300 mm |
| Media | Fuel, Water |
| Inspection And Testing Standard | API 6D |
| Certification | IBR |
| Condition | New |
| Design Type | SWING TYPE |
SWING TYPE CHECK VALVE
Features
- Cast Steel Check Valves have been designed to meet the requirements of BS 1868 /ASME B 16.34/API 6D-ISO14313.
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body.
- The Body to Bonnet joint is a male & female in ASME 150#, 300# & 600# valves and ring joint is used in higher classes.
- Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
SWING CHECK VALVE 150 CLASS SWING CHECK VALVE 300 CLASS
OPTIONS
- Tilting disc design available
- Check Valves can be supplied with counter weight or dash pot arrangement
Additional Information:
Flange End Ball Valve
-
-
-
- +9
Approx. Rs 150 / PieceGet Latest Price
Product BrochureProduct Details:| Minimum Order Quantity | 100 Piece |
| Valve Size | 2 inch |
| Usage/Application | Industrial |
| End Connection | Flange End |
| Material | MS |
| Pressure | Medium Pressure |
| I Deal In | New Only |
| WOG Rating | 150 |
| Country of Origin | Made in India |
| Branded (Y/N) | Yes |
| Design | 2 PIECE |
| Operation | manually |
| Place Of Origin | Indian |
| Usage/Application | usage in power stations,thermal power plants and oil drilling to control the flow of air & liquid |
We are a commendable manufacturer and supplier of an excellent quality Ball Valve. The provided valve finds comprehensive usage in power stations, thermal power plants and oil drilling to control the flow of air & liquid. Provided in variegated sizes and other related specifications to meet the exact needs and preferences of the patrons, this valve is manufactured using premium quality stainless steel and sophisticated technology under the guidance of our hardworking professionals. In addition, our clients can purchase this Ball Valve from us at rock bottom prices.
Note : Price mentioned is for general idea and it may fluctuate as per requirement
Features
- Ball Valves have been designed to meet the requirements
- BS 5351/ASME B 16.34 / API 6D /API 608/MSS SP 72
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 /API 6D/ DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- Fire tested design to API 607/API 6FA/BS 6755-II
- Flexible lip seats compensate for wear and changes in pressure
- Blow out proof stem construction
- Antistatic devices ensure electrical continuity between ball, stem & body
- Triple stem sealing
- ISO 5211 top pad for simplified gear/actuator mounting
- Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
OPTIONS
-
- For low temperature and cryogenic services (cold box and non-cold box applications extended bonnet as per BS 6364 available
- Locking arrangement
- Gear, Electrical, Hydraulic or Pneumatic actuator available
- Soft seats are recommended for service temperature up to 260 and for higher temperatures a metal to metal seating offered can be supplied
Additional Information:
Saunders Diaphragm Valves Type A & KB
-
-
-
- +9
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron & Stainless Steel |
| Usage/Application | Industrial |
| Type | Rubber Lined |
| Pressure | Medium Pressure |
| Connection Type | Flanges |
| Media Type | Oil, Water |
| Power | Manual |
| Standard | ANSI |
| Color | Blue |
| I Deal In | New Only |
| Leak Proof Seal | Yes |
| Country of Origin | Made in India |
| Pressure (bar) | 16 kg |
| Media Type | Water, Oil |
| Type | Rubber Lined |
| Connection Type | Flanges, Sockets |
| Temp. Of Media (degree) | 175 c |
| Power | Manual |
| Material | Cast Iron & Stainless Steel |
The diaphragm valves are mainly used in water treatment plants, fertilizer & petrochemicals industries, chemical industries, refineries, thermal power stations, and other process industries. Equally suited to on and off, or flow control applications, a diaphragm valve will handle positive pressures or high vacuum. Due to the wide range of material options it will handle almost all applications within its temperature and pressure ranges (175°C max. and 16 bar max.) and as such is used in almost every industry on both corrosive and abrasive applications. All working parts are isolated from the line media which enhances its reliability. Maintenance is a simple task with the body remaining in the pipe, the valve thus being field serviceable. It has linear flow characteristics which makes it well suited to throttling or modulating duties. On/off and control automation is possible with the use of modern compact actuators and accessories.
Additional Information:
Crane Centerline Butterfly Valves
-
-
-
- +9
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron |
| Usage/Application | Industrial |
| Power | Manual |
| Pressure | Medium Pressure |
| Media | Water |
| Operator | Lever |
| End Connection | Flange Mounted |
| Operation Type | By Gear, By Lever |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Usage/Application | quarter-turn valve used to regulate flow |
| Working Pressure | 150 to 750 psi |
| Design Type | WAFER TYPE |
| Dimension | 40 to 1500 mm |
| Material | Cast Iron |
Wafer Type Butterfly Valve
FEATURES- Butterfly Valve have been designed to meet the requirements of BS 1868 /ASME B 16.34/API 6D-ISO14313.
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body.
- The Body to Bonnet joint is a male & female in ASME 150#, 300# & 600# valves and ring joint is used in higher classes.
- Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
Additional Information:
L & T Make C S & S S Ball Valves
Approx. Rs 150 / PieceGet Latest Price
Product BrochureProduct Details:| Media | Water, Steam,Gas |
| Pressure | High Pressure |
| Connector Type | Screwed End, Flanged End |
| Material | Stainless Steel/Carbon Steel |
| Design | 1 pc, 2 pc, 3 pc |
| Temperature Of Media | High Temperature, Low Temperature, Medium Temperature |
| WOG Rating | 300, 600, 150 |
| Number of Ways | 2 ways |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 15 to 200 mm |
| Power | no power req |
| Condition | New |
| Design | 3 piece |
| Operation | manually |
| Place Of Origin | Indian |
3 pc Ball Va FEATURES
- Ball Valves have been designed to meet the requirements BS 5351/ASME B 16.34 / API 6D / API 608 / MSS SP 72
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / API 6D / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- Fire tested design to API 607 / API 6FA / BS 6755-II
- Flexible lip seats compensate for wear and changes in pressure
- Blow out proof stem construction
- Antistatic devices ensure electrical continuity between ball, stem & body
- Triple stem sealing
- ISO 5211 top pad for simplified gear/actuator mounting Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
| 3PC FLOATING BALL FULL PORT |
- One, two or three piece construction
- For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
Locking arrangement - Gear, Electrical, Hydraulic or Pneumatic actuator available
- Soft seats are recommended for service temperature up to 260o C and for higher temperatures a metal to metal seating shall be offered
Additional Information:
Ksb Cast Steel Gate Valve
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Size | 50 mm to 600 mm |
| Material | Cast Steel |
| End Connection Type | Flanged |
| Media | Gas, Air, Water |
| Manufacturing Standard | API 6 D |
| Usage/Application | Water & Fuel |
| Temperature Of Media | Low Temperature, Medium Temperature, High Temperature |
| Number Of Ways | 2 ways |
| Material Grade | WCB A 216 |
| Automation Grade | Manual |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 50 to 300 mm |
| Media | Water, Fuel |
| Condition | New |
| Temperature of Media | High Temperature |
| Manufacturing Standard | API 6D |
| Product Type | Gate type |
For our reputed and esteemed patrons, we are highly efficient in manufacturing and supplying an optimum quality Cast Steel Gate Valve. Offered valve is manufactured at our sophisticated production unit with the usage of premium quality raw materials and innovative technology in compliance with industry quality standards. The valve provided by us is basically used in pressurized systems such as boilers to relieve pressure. Moreover, our team of experts checks this Cast Steel Gate Valve on numerous parameters to assure its flawlessness.
Feature
- Cast Steel Gate Valves have been designed to meet the requirements of API 600 / BS 1414 / API 603 / API 6D /ASME B 16.34
- Face to Face and End to End dimensions conform to ASME B 16.10 /BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position.
- Anti-frictional Ball bearings are provided in higher sizes and classes.
- The strength of Stem to Gate connection is stronger than the strength of the Stem at the root of the operating thread
- Outside screw and yoke construction
- All the valves provided with backseat arrangement
Bi-directional shut-off
The gland is of self aligning two piece type Deep stuffing box
Body ports are streamlined, permitting unobstructed flow, reduces turbulence, results in lower pressure drop & lower erosion
The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body
The Body to Bonnet joint is flat in ASME 150# valves, a male and female joint is used in 300# & 600# and ring joint is used in higher classes
Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
Drawings
- Gate Valves 150#
- Gate Valve 300#
OPTIONS
Solid, flexible, split wedge, double disc and parallel Slide Gate configurations available
For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
Locking arrangement
Gear, Electrical, Hydraulic or Pneumatic actuator available
Additional Information:
L & T Butterfly Valves
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron |
| Usage/Application | Industrial |
| Power | Manual |
| Media | Fuel |
| Operator | Lever |
| Temperature Of Media | Medium Temperature, Low Temperature, High Temperature |
| Operation Type | By Gear, By Lever, By Actuator |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Usage/Application | quarter-turn valve used to regulate flow |
| Working Pressure | 150 to 750 psi |
| Design Type | WAFER TYPE |
| Dimension | 40 to 1500 mm |
| Material | Cast Iron |
Wafer Type Butterfly Valve
FEATURES- Butterfly Valve have been designed to meet the requirements of BS 1868 /ASME B 16.34/API 6D-ISO14313.
- Face to Face and End to End dimensions conform to ASME B 16.10 / BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body.
- The Body to Bonnet joint is a male & female in ASME 150#, 300# & 600# valves and ring joint is used in higher classes.
- Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
Additional Information:
L & T Cast Steel Valve
-
-
-
- +9
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Valve Size | More than 24 inch |
| Size | 15 mm to 1050 mm |
| Material | Cast Steel |
| End Connection Type | Flanged |
| Media | Water, Gas, Air |
| Usage/Application | Water & Fuel |
| Temperature Of Media | High Temperature, Medium Temperature, Low Temperature |
| Country of Origin | Made in India |
| Size | 50 to 300 mm |
| Media | Water, Fuel |
| Condition | New |
| Temperature of Media | High Temperature |
| Manufacturing Standard | API 6D |
| Product Type | Gate type |
For our reputed and esteemed patrons, we are highly efficient in manufacturing and supplying an optimum quality Cast Steel Gate Valve. Offered valve is manufactured at our sophisticated production unit with the usage of premium quality raw materials and innovative technology in compliance with industry quality standards. The valve provided by us is basically used in pressurized systems such as boilers to relieve pressure. Moreover, our team of experts checks this Cast Steel Gate Valve on numerous parameters to assure its flawlessness.
Feature
- Cast Steel Gate Valves have been designed to meet the requirements of API 600 / BS 1414 / API 603 / API 6D /ASME B 16.34
- Face to Face and End to End dimensions conform to ASME B 16.10 /BS 2080 / DIN
- End flange dimensions conform to ASME B 16.5 / API 605 / BS 3293 / DIN
- Butt weld end dimensions conform to ASME B 16.25
- The stem nut design allows for the removal of the hand-wheel while keeping the Stem and Gate in a fixed position.
- Anti-frictional Ball bearings are provided in higher sizes and classes.
- The strength of Stem to Gate connection is stronger than the strength of the Stem at the root of the operating thread
- Outside screw and yoke construction
- All the valves provided with backseat arrangement
Bi-directional shut-off
The gland is of self aligning two piece type Deep stuffing box
Body ports are streamlined, permitting unobstructed flow, reduces turbulence, results in lower pressure drop & lower erosion
The Seat-rings are cylindrical bottom seated type having ample cross section for strength are provided with welded in and threaded Seat-rings will be supplied on request. In case of SS valves the Seat-rings are integral to Body
The Body to Bonnet joint is flat in ASME 150# valves, a male and female joint is used in 300# & 600# and ring joint is used in higher classes
Valves meet the requirements of fugitive emission levels Shell category B as per MESC SPE 77/312
Drawings
- Gate Valves 150#
- Gate Valve 300#
OPTIONS
Solid, flexible, split wedge, double disc and parallel Slide Gate configurations available
For low temperature and cryogenic services (cold box and non-cold box applications) extended bonnet as per BS 6364 available
Locking arrangement
Gear, Electrical, Hydraulic or Pneumatic actuator available
Additional Information:
Forbes Marshall Piston Valves
-
-
-
- +1
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron |
| Usage/Application | Industrial |
| Pressure | High Pressure |
| Size | 1/2" to 10" |
| End Connection | Screwed & Flanged end |
| Country of Origin | Made in India |
| Media | Gas, Water |
| Size | 15 to 300 mm |
| Pressure | Medium Pressure, High Pressure |
| Condition | New |
| Power | Manual |
| Product Type | GLobe type |
Description : Piston valves provide perfect tightness and durable stability on different mediums such as steam,superheated steam,heat transfer fluid,ammonia,L.P.G,acids,alkalies etc
Size and Pipe Connections : 1. 15 NB / 20 NB / 25 NB /32NB/ 40 NB 2. 50NB/65NB/80NB/100NB/125NB/150NB/200NB
Limiting Conditions as per IBR norms : For (15,20,25 & 40NB) socket weld ends. For 15,20,& 25NB screwed ends. For (32-40 NB) screwed ends. For 50NB/65NB/80NB/100NB/125NB/150NB/200NB Body design conditions : ANSI 300 Flanged ends Body design conditions :ANSI 150 Flanged ends Screwed BSPT/NPT ends. Socket weld ends. Flange type :ANSI 150 Flange type :ANSI 300 Maximum operating pressure : 78 bar g Maximum operating temperature : 425 C Maximum hydraulic test pressure: 156 bar g Maximum operating pressure : 78 bar g Maximum operating temperature : 425 C Maximum hydraulic test pressure : 156 bar g Maximum operating pressure : 41.5bar g Maximum operating temperature : 425 C Maximum hydraulic test pressure: 83 bar g Maximum allowable pressure : 51 bar g @ 38 C Maximum operating pressure : 41.5 bar g @ 253 C Maximum operating temperature : 425 C @ 28.8 bar g Maximum hydraulic test pressure: 83 bar g Maximum allowable pressure : 19.6 bar g @ 38 C Maximum operating pressure : 14 bar g @ 197 C Maximum operating temperature : 425 C @ 5.5 bar g Maximum hydraulic test pressure : 28 bar g
Additional Information:
Forbes Marshall Bucket Trap
-
-
-
- +4
Approx. Rs 2,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron |
| Size | 1/2", 3/4",1",1.1/2",2" |
| Pressure | 13 kg |
| Max Operating Temperature | 220 Deg C |
| End Connection | Screwed End |
| Media | Steam |
| Available Design | FMBT30&50 |
| Temperature | 220 Deg C |
| Country of Origin | Made in India |
| Size | 15 to 50 mm |
| Model | Inverted Bucket type |
| Color | 13 kg |
| Material | Cast Iron |
| Brand | 220 c |
Inverted Bucket steam traps is designed so that they can be fitted into horizontal pipelines. They are maintainable in line and are complete with integral strainer screen.
Sizes and pipe connections: HMOO - 15 NB, screwed BSPT/ NPT HM10 - 20 NB, screwed BSPT/ NPT Hm12 - 25 NB, screwed BSPT/ NPT
Limiting Conditions: Maximum body design conditions 13 bar g PMA-max. Allowable pressure 13 bar g TMA-max. Allowable temperature 2200 C. Cold hydraulic test pressure 26 bar Maximum operating conditions depend upon orifice size. PMX - max. differential pressure
Model PMX (bar) HM 00 / 6 10.0 HM 00 / 7 8.5 HM 00/8 4.0 HM1 OH 12.5 HM10/8 8.5 HM 10/10 4.0 HM 12/7 13.0 HM 12/10 8.5 HM 12/12 4.0
Materials: Sr. Part Material Standard 1 Cover Cast Iron IS 210 FG220 2 Cover Studs & Nuts Carbon Steel IS 1367 3 Body Cast-Iron IS 210 FG220 4 Bucket Stainless Steel Type 304 ASTM - A - 240 5 Valve Guide Plate Screws Stainless Steel Type 304 IS 1364 6 Valve Guide Plate Stainless Steal Type 304 ASTM-A-240 7 Cover Gasket Reinforced exfoliated graphite 8 Valve Seat Stainless Steel Type 304 ASTM - A - 276 9 Valve Stainless Steel Type 304 ASTM – A - 276 10 Valve Lever Stainless Steel Type 304 ASTM - A - 240 11 Ferrule Stainless Steel Type 304 ASTM – A - 213 12 Strainer Screen Stainless Steel Type 304 ASTM - A - 240 13 Strainer Cap Stainless Steel / Cast Steel 14 Plug Carbon Steel spirax Inverted Bucket Steam Traps HM 00, HM 10, HM 12 6
Additional Information:
Fire Hydrant Valve
Approx. Rs 2,000 / PieceGet Latest Price
Product Details:| Usage/Application | Fire Safety |
| Valve Type | single & double |
| Material | Brass |
| Automation Grade | Manual |
| Diameter | 63 mm |
| Hand Wheel Material | CI |
| Number Of Head | Single & Double |
| Hydrant Type | Outdoor |
| Is It ISI Certified | ISI Certified |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Features | single & double |
| Size | 63 mm |
| Automation Grade | Manual |
| Number Of Heads | single & double |
| Hand Wheel Material | Cast Iron |
| Color | red |
We offer our clients 63mm Single outlet Landing Valve as per IS: 5290 Type A specifications. These ISI marked hydrant valves are available in 75mm NB inlet & 63mm female inst. outlet. These are manufactured by using Gunmetal of IS 318 LTB2/ SS304/ SS316 specifications. Its inlet can be provided in flanged type as per our client’s requirement. The outlet is generally female instantaneous and male inst. outlet is available on request. Our hydrant valves are available in size range of 38mm to 63mm
Additional Information:
Forbes Marshall Disc Check Valve
Approx. Rs 150 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Stainless Steel |
| Media | Fuel |
| Automation Grade | Manual |
| Pressure | 40 kg |
| Operating Pressure | 40 kg |
| Temperature | 300 Deg C |
| Usage/Application | For Fuel |
| Certification | MTC |
| Installation Type | Sandwhich type |
| Material Grade | SS |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Media | Fuel, Water |
| Product Type | Non Slamp type |
| Shape | Round |
| Diameter (inch) | 15 to 100 mm |
| Rating | 150 |
| Automation Grade | Manual |
Description The DCV2 and DCV3 disc check valves are of the wafer pattern designed to be sandwiched between flanges. They are suitable for use on a wide range of fluids for applicators in process lines, hot water systems, steam and condensate systems etc. Face-toface dimensions conform to EN 558 part 1, series 49.
Sizes and pipe connections DN15,20,25,32,40,50,65,80,100 Suitable for installation between BS 10 Tables 'E and ‘H', BS 4504/(DIN) PN6, 10, 16. 25, 40; JIS 5, 10. 16, 20 flanges with the following exceptions: DN40, 50. 80 and 100 - will not fit between JIS 5 flanges DN65 and 80 - will not fit between BS 10 'E' flanges.
Optional extras Heavy duty springs (700 mbar opening pressure, up to DN65) far boiler teed applications. Viton soft seats for oil, gas and steam applications. EPDM soft seats for water applications.
Additional Information:
Forbes Marshall Ball Float Steam Trap
Approx. Rs 1,000 / PieceGet Latest Price
Product BrochureProduct Details:| Material | Cast Iron |
| Size | 1/2",3/4",1" |
| Usage/Application | For Steam Line |
| Pressure | 13 kg |
| Design | Ball Float Type |
| Temperature | 220 Deg C |
| I Deal In | New Only |
| Body MOC Cast iron | Cast Iron |
| Country of Origin | Made in India |
| Size | 15 to 50 mm |
| Usage/Application | float type |
| Condition | New |
| Material | Cast Iron |
| Max Operating Temperature | 200 c |
| Pressure Ranges | 14 kg |
Description : FT - 14 ball float steam trap is a condensate drain trap of Cast Iron body and Stainless Steel internals.
Available Sizes and Pipe Connections : 40 and 50 NB screwed BSPT / NPT Note : Available Non-IBR only.
Available types and Limiting Conditions : FT 14 TV with Thermostatic air vent FT 14 SLR with Steam lock release Maximum operating conditions : Type PMO TMO 0 FT 14-4.5 4.5 bar 156 C 0 FT 14-10 10 bar 184 C 0 FT 14-14 14 bar 198 C
Note : PMO Maximum Operating Pressure TMO Maximum Operating Temp.
Body Design Conditions : 0 16 barg at 120 C 0 13 barg at 220 C Cold Hydraulic test pressure 32 barg.
Additional Information:
KSB Forge Steel Valve
-
-
-
- +2
Product Price :Get Latest Price
Product BrochureProduct Details:| Connector Type | Screwed |
| Model Name/Number | A 105 |
| Pressure | 800#, 1500#, 2500 |
| I Deal In | New Only |
| Country of Origin | Made in India |
| Size | 15 to 50 mm |
| Pressure (Bar) | 800 psi |
| Power | not required |
| Condition | New |
| Automation Grade | Manual |
KSB Forged Steel Valves
We offer wide range of the forged steel gate valves which are extensively used in the various industries like industry segment covers, chemical process industry, paper, sugar and textile industries. It is very well acknowledged by our valued clients for its good performance and consistency. Customization is also offered on forged steel gate, globe, check valves as it can be customized according to customer specifications and details.It has following features. Bulk quantities can be offered at most competitive prices.
Size Range : 1/2" to 2" Pressure Class : 800/1500/2500 Class |
Additional Information:
Forbes Marshall Safety Relief Valve
Approx. Rs 1,000 / PieceGet Latest Price
Product Details:| Material | Brass |
| Structure | Angle Type |
| Pressure | 17 kg |
| Media | Steam |
| Size | 3/4", 1", 1.1/2", 2" |
| Temp. Range | 224 Deg C |
| Connection Type | Screwed End |
| I Deal In | New Only |
| Screwed Or Flenged | Screwed End |
| Country of Origin | Made in India |
| Port Size | 15 to 100 mm |
| Design | Angle type |
| Fluid Handled | Steam |
| Place Of Origin | Indian |
| Material | Cast iron & Cast Steel |
| End Connection | Flanged end |
A safety valve is a valve which has the function of increasing the safety of a thermal-hydraulics plant. An example of safety valve could be a pressure safety valve (PSV), i.e. a pressure relief valve (PRV) which automatically releases a substance from aboiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits. Also pilot-operated relief valves could have the function of safety valves.
Safety valves were first used on steam boilers during the Industrial Revolution. Early boilers operating without them were prone to accidental explosion.
Vacuum safety valves (or combined pressure/vacuum safety valves) are used to prevent a tank from collapsing while it is being emptied, or when cold rinse water is used after hot CIP (clean-in-place) or SIP (sterilization-in-place) procedures. When sizing a vacuum safety valve, the calculation method is not defined in any norm, particularly in the hot CIP / cold water scenario, but some manufacturers [1] have developed sizing simulations.
Explore More Products
Shreeji Trading Corporation
Secunderabad - 500003, Hyderabad, Telangana, India
© Shreeji Trading Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited