Secunderabad, Hyderabad, Telangana
GST No. 36CJOPD0252L1Z5
Approx. Rs 100 / PieceGet Latest Price
Product BrochureProduct Details:Size/ Diameter | 15 mm to 500 mm |
Brand | Nagarjuna, Shivganga |
Fitting Type | ELbow, Tee, Flange, Reducer |
Material Grade | PE 63,80,100 |
Usage/ Application | Agriculture, Plumbing |
Connection | Welded |
Material | HDPE |
Country of Origin | Made in India |
Additional Information:
Approx. Rs 75 / MeterGet Latest Price
Product Details:Minimum Order Quantity | 100 Meter |
Thickness | >5 mm |
Surface Treatment | Galvanized |
Pipe Section | Round |
Approx. Rs 100 / PieceGet Latest Price
Product BrochureProduct Details:Nominal Diameter | 15 mm to 500 mm |
Bend Angle | 90 degree, 45 degree, 180 degree |
Schedule | sch 20, 40, 80, 120, 160 |
End Connection Type | Buttweld |
Country of Origin | Made in India |
Elbow Bend Angle | 90 Degree, 180 Degree, 30 Degree, 45 Degree, 60 Degree |
Application | Chemical Fertilizer Pipe, Structure Pipe, Gas Pipe |
Connection | Welded, Female |
Surface finish | Black finishing |
Nominal Size (inch) | 15 to 500 mm |
Color | black |
An elbow is a pipe fitting installed between two lengths of pipe or tubing to allow a change of direction, usually a 90° or 45° angle, though 22.5° elbows are also made. The ends may be machined for butt welding, threaded (usually female), or socketed, etc. When the two ends differ in size, the fitting is called a reducing elbow or reducer elbow.
Elbows are categorized based on various design features as below:
A 90 degree elbow is also called a "90 bend" or "90 ell". It is a fitting which is bent in such a way to produce 90 degree change in the direction of flow in the pipe. It is used to change the direction in piping and is also sometimes called a "quarter bend". A 90 degree elbow attaches readily to plastic, copper, cast iron, steel and lead. It can also attach to rubber with stainless steel clamps. It is available in many materials like silicone, rubber compounds, galvanized steel, etc. The main application of an elbow (90 degree) is to connect hoses to valves, water pressure pumps, and deck drains. These elbows can be made from tough nylon material or NPT thread.
A 45 degree elbow is also called a "45 bend" or "45 ell". It is commonly used in water supply facilities, food industrial pipeline networks, chemical industrial pipeline networks, electronic industrial pipeline networks, air conditioning facility pipeline, agriculture and garden production transporting system, pipeline network for solar energy facility, etc.
Most elbows are available in short radius or long radius variants. The short radius elbows have a center-to-end distance equal to theNominal Pipe Size (NPS) in inches, while the long radius is 1.5 times the NPS in inches. Short elbows are widely available, and are typically used in pressurized systems.
Additional Information:
Explore More Products
© Shreeji Trading Corporation. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited